On today’s road bikes, silver stands out amid the sea of stealthy black color schemes. This time-honored color is available on the Zipp Service Course stem. Since the introduction of our line of Service Course and Service Course SL components, we’ve had amazing success with our pro-level athletes in all disciplines. While the successes have reinforced our design decisions, we have also drawn from their feedback. We not only learned how and why athletes make their equipment choices, but how our manufacturing methods and materials affect product performance. With new knowledge as well as new engineering methods, we are proud to introduce our completely redesigned line of Service Course and Service Course SL stems. - Class-leading stiffness-to-weight ratio - More options for a better fit - New faceplate and geometry for greater stiffness and easier installation - Distinctive silver finish
Whisky's No.7 Stem is a lightweight stem with a clean aesthetic. Stems only have a few jobs to do: hold the bars, provide stable support, and look good. Ours does all three admirably. Paired with any of our handlebars, it rounds out the perfect Whisky cockpit. Available in a wide range of lengths to perfect your bike's fit and performance.
Dimension 25.4 Stem is a fully forged 6061-T6 aluminum stem with 4-bolt handlebar clamp. - 2-D forged AL-6061-T6 - Four-bolt handlebar clamp - 41mm height - Dimension stems are not intended for use with carbon handlebars or carbon steerer tubes - Weight: 130g-180g
The new Trail stem is forged and CNC-machined to meet the demands of today's trail riding with a sublime stiffness-to-weight ratio. - 3D-forged and CNC-machined 6061 alloy construction - 4-bolt oversized 31.8mm handlebar interface with relieved faceplate - Compatible with carbon composite handlebars
Full CNC machined AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design - EN-Mountain safety certification
3-D forged AL6061-T6 alloy construction - 40mm stack height - 4 bolt front loading faceplate design
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 73D Stem offers 17-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 73/17 degree - Stack: 45mm - Steerer: 1-1/8" - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
$49.99 - $69.99
Promax Banger stems have a front-load design and can be used with either side up, providing a 5-millimeter drop or rise. Available with 48-millimeter and 53-millimeter extensions, they are cold forged from the highest quality 6061-T6 aluminum then CNC machined to enhance the shape and further reduce weight. - Stack height: 30.5mm
Promax's DA-1 XC mountain bike stem is 3D cold-forged, then CNC-machined from 6061-T6 aluminum to create a lightweight and strong stem. The two-piece faceplate features their bar-gripping DWT (Dynalock Web Technology), which increases the bar/stem interface.
- 3D forged 6061 alloy road stems in 6 or 17 degree angles - Lightweight 4 bolt faceplate - Material: AL6061-T6 - Finish: Sandblasted
- Full UD carbon construction stem - 4 bolt aluminum faceplate for added rigidity - Stainless steel hardware - Reversible +/-7° angle - 40mm stack height - 125g weight in 100mm length - ISO-Road safety certified
Ritchey's first full-carbon stem was designed to meet the needs of high-wattage European Classics specialists. The Carbon C260 adds to the amazing strength-to-weight ratio of our C260 alloy and Carbon Matrix stems through the use of high modulus carbon fiber, increased boom diameter, and a wider clamp. Gram-for-gram, this is the lightest, stiffest full carbon stem on the market, making it the most advanced Ritchey stem ever. - C260 bar clamp creates a larger stem-to-bar interface, drastically reducing bolt stress - 4 x T-20 faceplate bolts and patented 260-degree bar clamp design reduces weight, increases stiffness, and distributes stress more evenly - 3 x T-20 steer tube bolts and curved clamp slot reduces weight and steer tube stress - Fits most road and mountain bars - Material: Carbon with 2014 alloy faceplate - Length: 90mm - Angle: 84/6 degree - Stack: 42mm - Faceplate width: 42mm - Steerer: 1-1/8" - 125g (110mm)
$119.00 - $139.00
The Syntace Flatforce stem utilizes a 12mm drop for all length options, allowing riders to keep their MTB handlebars in a lower riding position. - 200° clamp face increases handlebar strength and fatigue life - 42mm wide bar clamp for increased handlebar support - Super-low handlebar position solution for unique fit requirements - Sabertooth bar clamp design insures no bolts or clamping surfaces protrude - Stack Height: 27mm
Zipp’s SL Speed stem represents the essence of carbon componentry. It’s stiff, secure, and lightweight with a sleek design that complements any bike. It’s a perfect addition to a mountain climber’s favorite feather-light road bike, but it’s tough enough to tackle gravel and cyclocross. - Includes stiff aluminum faceplate and titanium hardware - Torx T25 heads for precise torque readings and ease of adjustment - Stack height: 41mm
Developed for longer-travel trail bikes, Promax's S-29 stem offers the perfect configuration to set you up for maximum comfort and control. Featuring an oversize extension tube and faceplate with massive clamping area, it’s sure to keep your bars stylishly in place through the most demanding terrain. These stems are cold-forged and CNC-machined from 6061-T6 aluminum for strength, low weight, and durability.
Save your steerer tube and eliminate headset spacers with the Velo Orange Tall-Stack alloy stem. It gives your bike's cockpit a nice clean look. Available in Polished or Black, the 17-degree angle allows the stem to be level on most modern frames. And, you can use handlebar clamp shims to adapt to smaller handlebar clamp diameters, if you like. - Stack height: 75mm - Not recommended for use with carbon steerer tubes
Introducing the Onyx stem. Using cold forging technology rather than CNC machining, this stem has an incredibly smooth and unique shape but also strength advantages over a traditional CNC machined stem. - Cold-forged deisgn for strength, asthetics and value - Weight saving internal machining - STC (Shark Tooth Clamping) for increased grip - Steerer Clamp Diameter: 1-1/8" ins - Weight (oz): 11.15 - Stem Type: Top Load
Sunday’s Freeze Topload Stem uses a die-cast aluminum body with forged 6061-T6 aluminum face plate rocking an embossed Sunday logo. It has recessed sides and bottom section to reduce weight without losing an ounce of strength. With their careful material and design choices, Sunday is able to offer the same stem used by the Sunday team at a very affordable price. - Reach: 52mm - Stack Height: 33mm - Rise: 34mm (1mm drop when inverted) - Clamp Bolts: M6 x 1.25mm pitch (x4) - Pinch Bolts: M6 x 1.25mm pitch (x2) - Weight: 10.5 oz
Just as cyclists maximize performance by being as light, but as powerful as possible, Zipp's SL Sprint Stem strikes the ideal balance of stiffness and lightweight to deliver responsive handling without wasting a single watt. - Unidirectional carbon - The SL Sprint comes with its own stem cap that’s designed to be aerodynamically efficient by blending into the stem body - Includes stiff aluminum faceplate and stainless steel hardware with TORX heads on all bolts for precision torque readings and ease of adjustment - Black matte carbon finish with white Zipp logos
You really can have it all-the WCS C220 stem rivals the performance of the revolutionary C260 stem design, but it's quicker and easier to install and remove thanks to a press-fit handlebar clamp interface and forward-facing hardware. The WCS C22 84D Stem offers 6-degrees of positive or negative rise. First proven on the Ritchey Trail Stem, the C220 handlebar clamp design creates a more secure interface by wrapping a full 220 degrees over the handlebar. Bolt forces are aligned with the clamp so that the stem body 'embraces' the handlebar, which is less prone to damaging lightweight bars. This clamp design allows for a lighter faceplate and stem body with no sacrifice in strength or stiffness. The stem body is forged 2014 aluminum for further weight reduction. Premium quality CrMo steel bolts are used throughout. - Material: 3D forged 2014 alloy body - 4 x 4mm coated CrMo steel forward-facing faceplate bolts - 2 x 4mm coated CrMo steel offset steer tube clamp bolts - 5Nm torque max on all hardware - Compatible with all 31.8mm bars - Press-fit clamp design installs and removes like a standard stem - Angle: 84/6 degree - Steerer Height: 42mm - Faceplate Width: 42mm - Blatte finish - 121g (110mm)
- Highly weight optimized single crown stem, ideal for Enduro applications with 31.8mm handlebars - Human Factor Design features micro increment size options, tuned to fit any rider size and style - Human Factor cockpit setup index facilitates tuning of upsweep and backsweep - Ultra-short stack height and true zero degree rise - Chamfered bar clamp to reduce stress risers and increase fatigue life in handlebars - Forged 2-piece faceplate design reduces overall weight without compromising bar clamp security or stiffness - Shot peen-anodized surface increases strength, durability, and fatigue life
Origin-8's Pro Fit Alloy Ergo Stem is a great upgrade for road and mountain bikes. It's 3D forged from lightweight and durable 6061-T6 aluminum. It has a 4-bolt, 2-piece face clamp that shaves grams and makes for quick and easy handlebar installation/removal. Plus, the opposing steerer clamp bolts apply more even holding force to protect the fork and keep your bars from changing position.
Stems need to be light, simple, and rock solid. Fizik checked all the boxes with their Cyrano R1 Stem. The Cyrano stem forms an integral part of Fizik's Spine Concept fitting technology. A four-bolt face plate provides excellent torsional stiffness, and the choice of lengths and angles ensures that your perfect fit is out there.
Dial in your perfect bike fit with FSA's Omega Stem. 3D-forged and CNC machined construction makes this stem stiff and light for power transfer and steering precision. The four-bolt faceplate holds bars securely, and this stem features stainless steel bolt hardware.
- Forged, CNC-machined 6061-T6 aluminum with hollow CrMo hex bolts - Open skeletal design and a dual mid-bolt wedge mounting system - 1" or 1-1/8" steerer clamp
The Elite X4 Mountain Stem is instantly recognizable because of Thomson's legendary style, and with strength to spare, this stem is more than just a pretty face. Made from a solid, one-piece block of 7000-series aluminum, the X4 combines exceptional strength with light weight for durable, solid steering control to tame the toughest trails. It has a four-bolt clamp design and reversible graphics, so your X4 looks great whichever way you run it.
Origin-8's Classic Sport Quill Stem is crafted from light and durable forged 6061 aluminum with chrome-plated steel bolts. The handlebar clamp bolt is hidden for a clean look. Different lengths are available for customizing the reach to your handlebars. This sweet stem is 180mm tall from the bottom of the bolt to the top of the stem so that you can raise and lower your bars, too.
$59.99 - $65.00
Optimize your comfort and riding position on the Turbo Vado with this sleek stem. It's made from lightweight and durable 6061 aluminum, and it features both an integrated display and light mount. This way, you're able to dial in your fit without losing any of the readily accessible functionality or illumination that you love from the Vado.
Profile's Aris stem is a no-nonsense stem made from 6061-aluminum that's been shot-peened and anodized for strength and durability. The 4-bolt face plate is stiff, ultra tough and makes handlebar changes a breeze. And, the opposing-bolt steerer clamp is safe and secure.
This BMX quill stem combines a steel rod with an alloy top. The 4-bolt top clamp securely fastens handlebars.
Page 1 of 4 Next page